Performance Coax and Twinax




75 Ohm Broadband/Broadcast & Video Cables

50 & 93 Ohm Plenum and Non-Plenum Cables

Twinaxial Cables Plenum and Non-Plenum

Telephony Coaxial Cables DS3&4

Lucent Equivalent Cables 734, 720, 728, 735

Multi Conductor Telephony Cables

RGB, Sync & Hold Miniature Coaxial Cables

Bundeld RGB Sync & Hold Cables

The ever increasing demand for bandwidth requires close tolerance interconnects. At General Wire Products, we are committed to providing the finest performing coaxial and twinaxial cables available. A constantly evolving system of testing, SPC, process engineering, designing and selecting materials enables us to produce top quality high performance coaxial and twinaxial cables.

Coaxial Cable Construction Abbreviation Key

Conductor - Solid or Stranded - Conductor diameter is included
- BC - Bare Copper
- TC - Tinned Copper
- SPC- Silver Plated Copper
- CCS - Copper Covered Steel

Dielectric - Foamed or Solid - Engineered for desired impedance. Dielectric diameter included for connector compatibility
- PE - Polyethylene
- FEP - Fluorinated Ethylene Propylene
- FPE - Foamed Polyethylene
- FF - Fluorofoam
- AS-PE - Air Spaced Polyethylene
- AS-FEP - Air Spaced Fluorinated Ethylene Propylene

Shielding - Foil and copper shields are utilized. dependant shield effectiveness and signal loss requirements. Copper shields can be braided or served. Foil shields provide 100% coverage. Braided or served shields coverage percentage is designated in each individual coaxial specification.
- AM Foil - Aluminum Mylar Polyester Tape
- BCSS - Bare Copper Served Shield
- BCBS - Bare Copper Braid Shield
- TCSS - Tinned Copper Served Shield
- TCBS - Tinned Copper Braid Shield
- SPCSS - Silver Plated Copper Served Shield
- SPCBS - Silver Plated Copper Braid Shield

Jackets - Jacket material selection is dependent on the cable application and safety rating.
- FR-PVC - Flame Retardant PVC - Riser and General Purpose rated
- TPE - Thermo Plastic Elastomer - Highly Flexible
- PU - Polyurethane - High Flexibility, Chemical and Abrasion Qualities
- PE - Polyethylene for Outdoor and Direct Burial Applications
- FEP - Fluorinated Ethylene Propylene- Plenum Rated 200 Degrees C
- HALAR - ECTFE - Plenum Rated 150 Degrees C
- KYNAR - PVDF - Plenum Rated 125-150 Degrees C
- PlenAlloy - Plenum Rated PVC - 75 Degrees C